AVE MV DR4000 Manual de Instruções descarregar pdf (Página 53)

3. Slide the top cover backward and remove.

4. Setting the jumper of your hard disk driver. The way to set the jumper

of the drive varies between manufacturers; please refer to the

instructions on the driver to set the jumpers in the master position.

5. Attach the interface connector and the power connector to the drive.

Please note the red lining of the IDE cable and the red wire of power

cable must line up side by side.

6. Place the HDD inside mobile rack, Use four of the provided screws.

7. Place the top cover back to the carrier body by sliding forward to

secure.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 86 87

Sem comentários

AVE MV DR4000 Manual de Instruções Página 53