AVE Video Serial Synchronous ATM Interface VSSI-PRO Manual do Utilizador descarregar pdf (Página 48)

Setup

2 - 16 ADPRO FastTrace, Issue 5

The Serial Communications Port 1 Settings and Serial Communications Port 2 Settings menus allow the operating

parameters of the two serial ports to be configured to match the model of modem or terminal adaptor used.

Figure 2-6 - Serial Communication Port Settings Menu

2.3.2.2.1 Modem/TA Model

Options: Model List, Direct Connect

Select the model of the modem or terminal adapter (TA) connected to the particular COMMS port. Refer to the

device’s user manual to assist with setting the correct configuration.

Use the Direct Connect option when the ADPRO FastTrace is connected directly to a PC running the ADPRO Video

Central Lite software. In this case, no modem or TA is required and a special (‘null-modem’) cable is needed for

correct operation. Refer to Figure 2-2 for the wiring diagram of the null-modem cable.

NOTE

The COMMS 2 port can be used for direct connections to a PC for local setup and for

software upgrades.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 91 92

Sem comentários

AVE Video Serial Synchronous ATM Interface VSSI-PRO Manual do Utilizador Página 48